HSGM Heat – Cutters

Description

Type HSG-0

Handoperated tool to cut small quantities, recommended for short-time operation only. Suitable to cut and seal the edges of synthetic fabric, such as cords, ropes, bands and belting fabric. Heat up time of blades approx 6-8 seconds. Heat may be controlled by switching tool on and off.

Technical Description:

• Supply voltage: 230V – 50Hz (110V – 60Hz) Power input: 60 Watt.
• Intermittent operation: 1/4 min. Protective insulation.
• 2 m electric cord with 2-pin straight plug Weight: 1,0 kg.

Basic Kit:

HSG-0

Operating instructions with EC Declaration of Conformity.

Blades not included

• Practicable blades: Leaflet “Heat-Cutters”, pages 6+7.
• Optional accessory: Cutting foot Type SF.
• If the tool is fitted with cutting foot SF and blade type R; synthetic fabric can be separated without using a cutting surface. This combined tool is especially effective when cutting large sized cloth such as sail cloth, awnings and filter cloth.
• The tools models HSG-1-VW, HSG-03-VW and HSG- 3-VW are equipped with blade holder type M. This blade holder can be fitted with an angle to hold cutting foot type SFW as well.

Technical Description:

• As type HSG-0, still weight: 1,1 kg.
• Practicable blade: Cutting blade type R